D7net
Home
Console
Upload
information
Create File
Create Folder
About
Tools
:
/
usr
/
src
/
linux-headers-6.8.0-101
/
include
/
linux
/
dma
/
Filename :
sprd-dma.h
back
Copy
/* SPDX-License-Identifier: GPL-2.0 */ #ifndef _SPRD_DMA_H_ #define _SPRD_DMA_H_ #define SPRD_DMA_REQ_SHIFT 8 #define SPRD_DMA_TRG_MODE_SHIFT 16 #define SPRD_DMA_CHN_MODE_SHIFT 24 #define SPRD_DMA_FLAGS(chn_mode, trg_mode, req_mode, int_type) \ ((chn_mode) << SPRD_DMA_CHN_MODE_SHIFT | \ (trg_mode) << SPRD_DMA_TRG_MODE_SHIFT | \ (req_mode) << SPRD_DMA_REQ_SHIFT | (int_type)) /* * The Spreadtrum DMA controller supports channel 2-stage tansfer, that means * we can request 2 dma channels, one for source channel, and another one for * destination channel. Each channel is independent, and has its own * configurations. Once the source channel's transaction is done, it will * trigger the destination channel's transaction automatically by hardware * signal. * * To support 2-stage tansfer, we must configure the channel mode and trigger * mode as below definition. */ /* * enum sprd_dma_chn_mode: define the DMA channel mode for 2-stage transfer * @SPRD_DMA_CHN_MODE_NONE: No channel mode setting which means channel doesn't * support the 2-stage transfer. * @SPRD_DMA_SRC_CHN0: Channel used as source channel 0. * @SPRD_DMA_SRC_CHN1: Channel used as source channel 1. * @SPRD_DMA_DST_CHN0: Channel used as destination channel 0. * @SPRD_DMA_DST_CHN1: Channel used as destination channel 1. * * Now the DMA controller can supports 2 groups 2-stage transfer. */ enum sprd_dma_chn_mode { SPRD_DMA_CHN_MODE_NONE, SPRD_DMA_SRC_CHN0, SPRD_DMA_SRC_CHN1, SPRD_DMA_DST_CHN0, SPRD_DMA_DST_CHN1, }; /* * enum sprd_dma_trg_mode: define the DMA channel trigger mode for 2-stage * transfer * @SPRD_DMA_NO_TRG: No trigger setting. * @SPRD_DMA_FRAG_DONE_TRG: Trigger the transaction of destination channel * automatically once the source channel's fragment request is done. * @SPRD_DMA_BLOCK_DONE_TRG: Trigger the transaction of destination channel * automatically once the source channel's block request is done. * @SPRD_DMA_TRANS_DONE_TRG: Trigger the transaction of destination channel * automatically once the source channel's transfer request is done. * @SPRD_DMA_LIST_DONE_TRG: Trigger the transaction of destination channel * automatically once the source channel's link-list request is done. */ enum sprd_dma_trg_mode { SPRD_DMA_NO_TRG, SPRD_DMA_FRAG_DONE_TRG, SPRD_DMA_BLOCK_DONE_TRG, SPRD_DMA_TRANS_DONE_TRG, SPRD_DMA_LIST_DONE_TRG, }; /* * enum sprd_dma_req_mode: define the DMA request mode * @SPRD_DMA_FRAG_REQ: fragment request mode * @SPRD_DMA_BLK_REQ: block request mode * @SPRD_DMA_TRANS_REQ: transaction request mode * @SPRD_DMA_LIST_REQ: link-list request mode * * We have 4 types request mode: fragment mode, block mode, transaction mode * and linklist mode. One transaction can contain several blocks, one block can * contain several fragments. Link-list mode means we can save several DMA * configuration into one reserved memory, then DMA can fetch each DMA * configuration automatically to start transfer. */ enum sprd_dma_req_mode { SPRD_DMA_FRAG_REQ, SPRD_DMA_BLK_REQ, SPRD_DMA_TRANS_REQ, SPRD_DMA_LIST_REQ, }; /* * enum sprd_dma_int_type: define the DMA interrupt type * @SPRD_DMA_NO_INT: do not need generate DMA interrupts. * @SPRD_DMA_FRAG_INT: fragment done interrupt when one fragment request * is done. * @SPRD_DMA_BLK_INT: block done interrupt when one block request is done. * @SPRD_DMA_BLK_FRAG_INT: block and fragment interrupt when one fragment * or one block request is done. * @SPRD_DMA_TRANS_INT: tansaction done interrupt when one transaction * request is done. * @SPRD_DMA_TRANS_FRAG_INT: transaction and fragment interrupt when one * transaction request or fragment request is done. * @SPRD_DMA_TRANS_BLK_INT: transaction and block interrupt when one * transaction request or block request is done. * @SPRD_DMA_LIST_INT: link-list done interrupt when one link-list request * is done. * @SPRD_DMA_CFGERR_INT: configure error interrupt when configuration is * incorrect. */ enum sprd_dma_int_type { SPRD_DMA_NO_INT, SPRD_DMA_FRAG_INT, SPRD_DMA_BLK_INT, SPRD_DMA_BLK_FRAG_INT, SPRD_DMA_TRANS_INT, SPRD_DMA_TRANS_FRAG_INT, SPRD_DMA_TRANS_BLK_INT, SPRD_DMA_LIST_INT, SPRD_DMA_CFGERR_INT, }; /* * struct sprd_dma_linklist - DMA link-list address structure * @virt_addr: link-list virtual address to configure link-list node * @phy_addr: link-list physical address to link DMA transfer * @wrap_addr: the wrap address for link-list mode, which means once the * transfer address reaches the wrap address, the next transfer address * will jump to the address specified by wrap_to register. * * The Spreadtrum DMA controller supports the link-list mode, that means slaves * can supply several groups configurations (each configuration represents one * DMA transfer) saved in memory, and DMA controller will link these groups * configurations by writing the physical address of each configuration into the * link-list register. * * Just as shown below, the link-list pointer register will be pointed to the * physical address of 'configuration 1', and the 'configuration 1' link-list * pointer will be pointed to 'configuration 2', and so on. * Once trigger the DMA transfer, the DMA controller will load 'configuration * 1' to its registers automatically, after 'configuration 1' transaction is * done, DMA controller will load 'configuration 2' automatically, until all * DMA transactions are done. * * Note: The last link-list pointer should point to the physical address * of 'configuration 1', which can avoid DMA controller loads incorrect * configuration when the last configuration transaction is done. * * DMA controller linklist memory * ====================== ----------------------- *| | | configuration 1 |<--- *| DMA controller | ------->| | | *| | | | | | *| | | | | | *| | | | | | *| linklist pointer reg |---- ----| linklist pointer | | * ====================== | ----------------------- | * | | * | ----------------------- | * | | configuration 2 | | * --->| | | * | | | * | | | * | | | * ----| linklist pointer | | * | ----------------------- | * | | * | ----------------------- | * | | configuration 3 | | * --->| | | * | | | * | . | | * . | * . | * . | * | . | * | ----------------------- | * | | configuration n | | * --->| | | * | | | * | | | * | | | * | linklist pointer |---- * ----------------------- * * To support the link-list mode, DMA slaves should allocate one segment memory * from always-on IRAM or dma coherent memory to store these groups of DMA * configuration, and pass the virtual and physical address to DMA controller. */ struct sprd_dma_linklist { unsigned long virt_addr; phys_addr_t phy_addr; phys_addr_t wrap_addr; }; #endif